Rotisserie Chicken Tinga Tacos Restaurant Equipment Online Auction

Advance Tabco CRSH-4 stainless steel underbar soda gun holder. This unit is in excellent condition with protective film still partially applied. The stainless steel body shows only minor surface marks and light scuffing consistent with storage and handling. FEATURES: Retail Price: $385 • Stainless steel construction for durability and sanitation • 4-inch wide compact underbar design - fits tight bar spaces • Built-in manifold housing for soda gun lines • Pre-drilled mounting holes on rear panel for secure installation • NSF listed for commercial foodservice use CONDITION: Rated 9/10. Stainless steel exterior is in excellent shape with protective film still partially attached on some surfaces. Minor surface scuffing and light scratches visible from storage and handling. Some adhesive residue and minor cosmetic marks on the lower housing. Mounting holes on the rear panel are intact and ready for installation. All structural welds appear solid and complete. No dents, rust, or corrosion observed.

Advance Tabco CRSH-4 stainless steel underbar soda gun holder. This unit is in excellent condition with protective film still partially applied. The stainless steel body shows only minor surface marks and light scuffing consistent with storage and handling. FEATURES: Retail Price: $385 • Stainless steel construction for durability and sanitation • 4-inch wide compact underbar design - fits tight bar spaces • Built-in manifold housing for soda gun lines • Pre-drilled mounting holes on rear panel for secure installation • NSF listed for commercial foodservice use CONDITION: Rated 9/10. Stainless steel exterior is in excellent shape with protective film still partially attached on some surfaces. Minor surface scuffing and light scratches visible from storage and handling. Some adhesive residue and minor cosmetic marks on the lower housing. Mounting holes on the rear panel are intact and ready for installation. All structural welds appear solid and complete. No dents, rust, or corrosion observed.

Brand new, factory-sealed Krowne Model 23-157 Overflow Assembly for 1-1/2" NPS drains. This item is still in its original unopened packaging with all components visible through the clear bag, including the tailpiece, plastic washer, tubing, and two clamps. FEATURES: Retail Price: $94 • Overflow assembly designed for 1-1/2" NPS drains • Fits Krowne hand sinks • Kit includes one tailpiece, plastic washer, tubing, and two clamps • Complete assembly - all components included • Krowne brand commercial-grade plumbing component CONDITION: BRAND NEW - Factory sealed, never used. Original packaging is fully intact with no tears or damage. All components are clearly visible and undamaged through the sealed clear packaging. Yellow product label is clean and legible with no wear.

Advance Tabco D-24-SIBL drop-in hand sink with integrated ice bin. This unit still has its blue protective film on the top surface and appears to be in near-new condition with minimal signs of use. The stainless steel basin and ice compartment are clean and free of significant wear. FEATURES: Retail Price: $935 • Stainless steel construction with drop-in design • Integrated ice bin with 23 lb. capacity for gravity-fed cold water • NSF Component certified for commercial foodservice environments • Includes drain basket strainer in sink basin • Wall-mount bracket and drain fitting included CONDITION: Near-new condition rated 9/10. Blue factory protective film is still intact on the top surface and edges. Stainless steel sink basin and ice compartment show minimal use with no dents, scratches, or corrosion. Drain hardware is present and in excellent shape. Wall-mount bracket is included. Overall an extremely clean unit with only the faintest signs of handling.

NEVER BEEN USED! Freestanding CartWipes Clean sanitizing wipe dispenser station in silver/gray powder-coated steel. This unit comes with a removable black wipe canister and includes 3 bags of sanitizing wipes - one CartWipes Clean pre-moistened multi-purpose cleansing towelette roll and two Tazza-X hand sanitizing wipe refills (75% alcohol formula). The station shows moderate use consistent with its 5/10 condition rating. FEATURES: Retail Price: $495 • Heavy-duty cylindrical steel construction with textured powder-coated finish • Hinged top lid for easy wipe roll loading and replacement • Front dispensing slot for convenient pull-through wipe access • Built-in used wipe disposal area at base with lower access opening • Includes removable black wipe canister branded CartWipes Clean • Comes with 3 bags of sanitizing wipes (1 CartWipes Clean, 2 Tazza-X) CONDITION: Unit is in used condition rated 5/10. The powder-coated exterior shows general wear and light surface scuffing throughout. The hinged lid operates properly. The interior shows some darkening and minor wear. The removable black wipe canister is included and functional. All three bags of wipes are included - wipes appear to still be sealed/usable. No structural damage or dents observed. The base and lower trash receptacle opening are intact.

Carlisle Trimline Swing Lid in beige, never used. The label on the underside reads "TRIMLINE SWING LID - BEIGE" with part number 3420202486. The lid and matching rectangular base/tray appear clean and free of any wear, scratches, or damage. This is a commercial swing lid designed to fit Carlisle Trimline waste containers. FEATURES: Retail Price: $39 • Trimline swing lid for Carlisle waste receptacles • Beige color for clean, neutral appearance • Commercial-grade durable plastic construction • Swing-style lid allows hands-free waste disposal • Never used - pristine condition CONDITION: Item has never been used per staff notes. Visual inspection confirms no scratches, scuffs, cracks, or discoloration on the beige plastic surfaces. Label is intact and legible on the underside. Item appears to be in like-new condition consistent with a 9/10 rating.

Brand new Dispense-Rite ADJ-1.50 adjustable cup dispenser, still in original Dispense-Rite box with instruction sheet included. This stainless steel in-counter cup dispenser is designed for cups approximately 1.50" in diameter and features spring-loaded dispensing for one-at-a-time cup retrieval. FEATURES: Retail Price: $208 • Adjustable spring-loaded cup dispenser for 1.50" diameter cups • Stainless steel construction - NSF certified component • Can be mounted horizontally or vertically • Adjustable bezel ring and clips for precise cup fit • Made in USA by Diversified Metal Products, Inc. (Northbrook, IL) CONDITION: BRAND NEW - Never used. Original Dispense-Rite factory packaging intact with instruction sheet still in sealed plastic bag. Stainless steel cylinder is clean and free of scratches, dents, or marks. Box shows minor shelf wear but unit is in pristine, unused condition.

Brand new Dispense-Rite ADJ-1.50 adjustable cup dispenser, still in original Dispense-Rite box with instruction sheet included. This stainless steel in-counter cup dispenser is designed for cups approximately 1.50" in diameter and features spring-loaded dispensing for one-at-a-time cup retrieval. FEATURES: Retail Price: $208 • Adjustable spring-loaded cup dispenser for 1.50" diameter cups • Stainless steel construction - NSF certified component • Can be mounted horizontally or vertically • Adjustable bezel ring and clips for precise cup fit • Made in USA by Diversified Metal Products, Inc. (Northbrook, IL) CONDITION: BRAND NEW - Never used. Original Dispense-Rite factory packaging intact with instruction sheet still in sealed plastic bag. Stainless steel cylinder is clean and free of scratches, dents, or marks. Box shows minor shelf wear but unit is in pristine, unused condition.

Brand new Dispense-Rite ADJ-1.50 adjustable cup dispenser, still in original Dispense-Rite box with instruction sheet included. This stainless steel in-counter cup dispenser is designed for cups approximately 1.50" in diameter and features spring-loaded dispensing for one-at-a-time cup retrieval. FEATURES: Retail Price: $208 • Adjustable spring-loaded cup dispenser for 1.50" diameter cups • Stainless steel construction - NSF certified component • Can be mounted horizontally or vertically • Adjustable bezel ring and clips for precise cup fit • Made in USA by Diversified Metal Products, Inc. (Northbrook, IL) CONDITION: BRAND NEW - Never used. Original Dispense-Rite factory packaging intact with instruction sheet still in sealed plastic bag. Stainless steel cylinder is clean and free of scratches, dents, or marks. Box shows minor shelf wear but unit is in pristine, unused condition.

NEVER BEEN USED! Vita-Mix Rinse-O-Matic blender container rinser, model 1410V. This unit features a black base with the "rinse-o-matic" branding molded into the top, a red push-down spray nozzle, and a braided water supply hose with quick-connect fitting. A bag of extra replacement parts and fittings is included. FEATURES: Retail Price: $132 • Rinse-O-Matic automatic blender container rinser • Model 1410V - compatible with Vitamix commercial blender containers • Red push-down spray nozzle for hands-free rinsing • Braided water supply hose with quick-connect fitting • Includes bag of extra replacement parts and fittings CONDITION: Unit shows moderate use consistent with a 5/10 rating. The black plastic base and spray nozzle assembly are intact and appear functional. The braided hose and quick-connect fitting show some light wear and minor discoloration. The white hose connector shows slight soiling. A bag of extra parts is included with additional fittings, nozzle components, and hardware. No visible cracks or structural damage to the main body.

San Jamar Modular Frontline pump dispenser base in black. This unit is in excellent condition with minimal signs of use and includes the original Modular Frontline Kit Assembly Instructions sheet. The base is designed to hold condiment pumps and integrates with San Jamar's modular dispensing system. FEATURES: Retail Price: $50 • Black molded plastic dispenser base • Part of the San Jamar Modular Frontline system • Accepts condiment pumps in the open center space • Interlocking rubber linking feet for connecting multiple units side by side • Includes original assembly instruction sheet (part 193856) CONDITION: Item is in excellent condition rated 9/10. The black plastic body is clean with no cracks, chips, or significant scratches. The unit appears to have seen very little use. Assembly instruction sheet is included and in good readable condition.

White plastic FIFO flow shelf insert designed for use with the Rubbermaid ProSave 9G57 ingredient bin. This insert slide-locks into the interior slots of the bin, creating an angled shelf that forces newly added ingredients to slope toward the front, ensuring proper first-in, first-out stock rotation. FEATURES: Retail Price: $50 • FIFO (First In, First Out) ingredient management insert • Slide-lock design fits interior slots of Rubbermaid 9G57 Ingredient Bin • White food-safe plastic construction • Angled shelf promotes proper ingredient rotation - older stock used first • Removable for easy cleaning and sanitizing CONDITION: Item is in used condition rated 8/10. The white plastic shows minor surface marks and light scuffing consistent with use, but no cracks, breaks, or structural damage are visible. Both locking tabs on either end appear intact and functional. Overall clean and in good working order.

Natural Sorb Environmental Organic Absorbent spill kit in a durable zippered carry bag. The bag is in excellent condition with clean gray nylon exterior, functioning zipper, and intact web carrying straps. Inside, the absorbent material appears to be sealed and unused. Label identifies Natural Sorb Corp out of Jacksboro, TN, and the accompanying Material Safety Data Sheet confirms the product is a peat moss-based organic absorbent designed for environmental spill cleanup. FEATURES: Retail Price: $165 • Peat moss-based organic absorbent - 90% peat composition • Non-toxic and non-hazardous (0 health, 0 fire, 0 reactivity rating) • Portable zippered nylon carry bag with reinforced web straps • Suitable for absorbing oils, grease, chemicals, and other liquids • Compact and easy to store in any commercial kitchen or facility CONDITION: Rated 9/10. The carry bag exterior is clean with no tears, stains, or significant wear. Zipper functions properly. Web straps and buckles are intact. The absorbent material inside appears sealed and unused. The MSDS sheet shows some creasing and wear but remains fully legible. Overall in excellent, near-new condition.

Brand new, factory sealed Cambro Camshelving Premium Traverse Shelf Pack, model CPTR542PK480. This item is still in its original Cambro cardboard packaging, unopened and never used. The box label clearly shows the model number, production date of 12/23, and weight of 11.5 lbs. FEATURES: Retail Price: $314 • Cambro Camshelving Premium Series traverse shelf component • Model CPTR542PK480 - Speckled Gray (480) finish • 54" wide traverse shelf rail pack • Durable, corrosion-resistant polymer construction • NSF listed - designed for commercial foodservice environments CONDITION: BRAND NEW - Factory sealed, never used. Original Cambro packaging is intact with minor scuffing and edge wear on the cardboard box from shipping/handling, but the product inside has not been opened. Production date 12/2023 visible on label.

Brand new, factory sealed Cambro Camshelving Premium Traverse Shelf Pack, model CPTR542PK480. This item is still in its original Cambro cardboard packaging, unopened and never used. The box label clearly shows the model number, production date of 12/23, and weight of 11.5 lbs. FEATURES: Retail Price: $314 • Cambro Camshelving Premium Series traverse shelf component • Model CPTR542PK480 - Speckled Gray (480) finish • 54" wide traverse shelf rail pack • Durable, corrosion-resistant polymer construction • NSF listed - designed for commercial foodservice environments CONDITION: BRAND NEW - Factory sealed, never used. Original Cambro packaging is intact with minor scuffing and edge wear on the cardboard box from shipping/handling, but the product inside has not been opened. Production date 12/2023 visible on label.

Large stainless steel commercial mixer bowl, likely compatible with Hobart or similar 80-quart floor mixers. The bowl features dual side handles and a locking tab on the exterior for securing to the mixer. It shows signs of use consistent with a working commercial kitchen environment, including surface scratches and minor discoloration. FEATURES: Retail Price: $1,045 • Heavy-duty stainless steel construction • Approximately 80-quart capacity • Dual side handles for easy handling and transport • Bowl lock bracket/tab on exterior wall • Compatible with commercial floor-model planetary mixers CONDITION: Rated 8/10. The stainless steel bowl shows moderate surface scratching and scuff marks throughout, consistent with regular commercial use. There is some minor discoloration and patina visible on the exterior, particularly near the lower half. The interior shows light wear marks but no dents or deformations. The side handles and locking tab appear intact and functional. No cracks or holes observed. Overall the bowl is in solid working condition with cosmetic wear only.

Hobart-style stainless steel mixing bowl, approximately 40-quart capacity, featuring two side handles and a bowl lock pin for secure attachment to a floor-standing mixer. The bowl shows signs of regular commercial use including surface scratches and minor scuffing on the exterior, but remains fully functional with no dents or structural damage. FEATURES: Retail Price: $935 • Heavy-duty stainless steel construction • Approximately 40-quart capacity • Two welded side handles for safe lifting and transport • Bowl lock pin on side for secure mixer attachment • Compatible with Hobart 40-quart floor-standing mixers CONDITION: Rated 8/10. The stainless steel exterior shows moderate surface scratching and scuffing consistent with regular commercial kitchen use. There appears to be a faded label or marking on the front exterior. The interior is clean with minor wear marks. No dents, cracks, or structural issues observed. Both handles are intact and securely attached. The bowl lock pin on the side is present and appears functional. Overall a solid, usable bowl with normal cosmetic wear.

Stainless steel commercial mixer bowl with two welded side handles, consistent with a 30-quart Hobart-style floor mixer bowl. The bowl shows moderate use with visible surface scratches, scuffing, and minor discoloration throughout, but remains structurally solid with no dents or cracks observed. FEATURES: Retail Price: $495 • Stainless steel construction for durability and sanitation • Approximately 30-quart capacity • Two welded side handles for safe lifting and transport • Rounded bottom design for thorough ingredient incorporation • Compatible with Hobart 30 Qt floor mixers CONDITION: Rated 7/10. The bowl exhibits moderate wear consistent with regular commercial kitchen use. The interior shows surface scratches and light scuffing across the bottom and sides. The exterior has visible scratching and some discoloration along the lower half. Both handles are firmly attached with no looseness. No dents, cracks, or structural damage observed. The rim and locking collar appear intact and functional.

Stainless steel 20 quart commercial mixer bowl with two side handles. The bowl shows signs of regular commercial use including light surface scratching and minor scuffing on the exterior, but remains structurally sound with no dents or deformations visible. FEATURES: Retail Price: $385 • Heavy-duty stainless steel construction • Approximately 20 quart capacity • Two welded side handles for safe handling • Rolled rim for secure mixer cradle attachment • Compatible with 20 qt planetary mixers (Hobart and similar) CONDITION: Rated 8/10. The stainless steel exterior shows moderate surface scratching and light scuffing consistent with regular commercial kitchen use. The interior is clean with minor wear marks. Both handles are securely attached with no looseness. The rolled rim is intact with no warping or damage. No dents, cracks, or structural issues observed. Overall a solid, fully functional mixer bowl in good used condition.

Large commercial wire whip attachment designed for a 60-quart planetary mixer. This is a substantial whip featuring approximately 20 stainless steel wires attached to a heavy cast aluminum hub with a standard locking shaft connector. The attachment shows signs of prior use but remains in solid working condition. FEATURES: Retail Price: $385 • Stainless steel wire whip construction • Heavy-duty cast aluminum hub base • Approximately 20 individual wires for efficient aeration • Standard locking shaft connector for commercial planetary mixers • Designed for 60-quart mixer capacity CONDITION: The stainless steel wires are intact with no visible bends or breaks. The cast aluminum hub shows light surface oxidation and minor wear consistent with commercial kitchen use. A small spot of surface rust is visible near the base of the shaft connector. Several wires show slight warping at the top but the overall shape is well maintained. Rated 8/10 - used but fully functional.

Commercial wire whip whisk attachment designed for a large floor-standing planetary mixer, likely a 30 or 40 quart unit. The attachment shows signs of regular commercial use with oxidation and wear visible on the cast aluminum hub and drive shaft connection. FEATURES: Retail Price: $204 • Stainless steel wire whip attachment for commercial planetary mixer • Heavy-duty cast aluminum hub with square drive shaft connection • Multiple stainless steel wires designed for whipping, aerating, and mixing • Compatible with 30-40 quart commercial floor mixers • Bolted hub plate construction with multiple fastening screws CONDITION: Rated 7/10. The cast aluminum hub shows oxidation and surface wear consistent with regular commercial kitchen use. The square drive shaft connection appears intact and functional. Stainless steel wires are all present and intact with no visible bends or breaks. The hub plate shows some discoloration around the seam where the wires are secured. Overall a solid, functional whip attachment with cosmetic wear from use.

Heavy-duty cast aluminum spiral dough hook attachment designed for a commercial spiral dough mixer. This is a replacement or spare spiral hook that shows signs of prior use but remains fully functional and structurally sound. FEATURES: Retail Price: $495 • Heavy-duty cast aluminum construction • Spiral/corkscrew dough hook design for thorough kneading • Center-mount shaft with keyed hub for secure mixer attachment • Commercial-grade build for high-volume bakery operations • Compatible with large-capacity spiral mixers CONDITION: Rated 8/10. The aluminum casting shows surface scuffing, minor scratches, and light oxidation consistent with commercial kitchen use. The bottom of the base shows some discoloration and wear around the keyed hub area. The shaft mounting hole and key slot appear intact and functional. No cracks, bends, or structural damage observed. Overall, this dough hook is in solid working condition with normal cosmetic wear from use in a commercial environment.

Commercial cast aluminum flat beater paddle attachment for a planetary mixer. This appears to be sized for a 20 to 30 quart commercial mixer based on proportions visible in the photos. The paddle shows signs of prior use consistent with a working kitchen environment. FEATURES: Retail Price: $165 • Cast aluminum flat beater paddle construction • Standard hub fitting for commercial planetary mixers • Open-frame design for efficient mixing of batters and soft doughs • Heavy-duty build for commercial kitchen use • Estimated compatibility with 20-30 quart mixers CONDITION: Rated 8/10. The aluminum paddle shows light surface oxidation and minor scuffing consistent with regular commercial use. No cracks, bends, or structural damage visible. The hub connection point appears intact and in good working order. Overall the beater is in solid, functional condition with normal cosmetic wear.

Cast aluminum spiral dough hook attachment for a commercial planetary mixer. This attachment shows signs of normal use with light surface oxidation and minor wear consistent with regular operation, but remains fully functional with no cracks or structural damage. FEATURES: Retail Price: $94 • Cast aluminum construction for durability and lightweight handling • Spiral dough hook design ideal for kneading bread, pizza, and heavy doughs • Pin-style hub connection with Phillips-head securing screw at base • Compatible with commercial planetary stand mixers (appears to fit 20-quart class) • Standard replacement attachment - fits multiple commercial mixer brands CONDITION: Rated 8/10. The dough hook shows light surface oxidation and minor discoloration typical of a used aluminum attachment. There is a small spot of rust visible near the tip of the hook. The base hub and securing screw are intact and functional. The overall shape is true with no bends, cracks, or structural deformities. This is a used attachment in solid working condition.

Hobart flat beater paddle attachment for a 60-quart commercial planetary mixer. This cast aluminum paddle shows typical signs of commercial kitchen use but remains fully functional with solid structural integrity throughout. FEATURES: Retail Price: $385 • Cast aluminum flat beater/paddle design for 60-quart Hobart mixers • Heavy-duty one-piece cast construction for durability • Standard Hobart hub connection with locking pin slot • Stamped part number visible on shaft (D0960-13) • Compatible with Hobart H-600, P-660, and L-800 series mixers CONDITION: Rated 8/10. The cast aluminum shows general wear consistent with commercial use, including surface oxidation and minor discoloration throughout. No cracks, bends, or structural damage observed. The hub connection and locking pin slot appear intact and functional. The beater tines and frame are straight with no warping. Some buildup and patina visible on the shaft and paddle surfaces, but this is cosmetic and does not affect performance.

Brand new Cleveland Gear Company speed reducer, Type UHO, Size 262, with a 30:1 ratio. This unit appears never installed and still has its original packaging label (Part No. H388561, Mfg. No. 2051) and sealed hardware/documentation packet. The cast iron housing is in excellent condition with only very minor surface oxidation from storage. Unit is shipped dry per the factory warning label - lubricant required before use. Originally supplied as a Hobart OEM component (Part 186696). FEATURES: Retail Price: $1,980 • Type UHO worm gear speed reducer - Size 262 • 30:1 gear ratio for torque multiplication • Hollow output shaft with 4-bolt flange mount • Heavy-duty cast iron housing - Made in Taiwan • Includes original hardware packet and documentation CONDITION: BRAND NEW - Never installed or used. Factory paint and markings fully intact. Minor surface oxidation/patina on some areas of the cast iron housing consistent with dry storage. Original Cleveland Gear Company label clearly readable on housing. Warning label for dry-shipped lubrication intact. Original packaging materials and hardware packet included. Mfg. No. 2051.

Hobart H-600 60-quart commercial floor mixer in used condition with white painted exterior. Unit comes with a stainless steel 60-quart bowl and two dough hook attachments. Not tested prior to listing. FEATURES: Retail Price: $19,800 • 60-quart stainless steel mixing bowl included • Two dough hook attachments included • 3-speed gear-driven transmission with lever selector • 1 HP motor - 200V, 3-phase, 60Hz, 5.9 AMP • Heavy-duty floor-standing planetary mixer - Made in USA CONDITION: Unit is rated 7/10. The white painted exterior has been repainted and is in overall clean condition with minor imperfections. The start/stop button panel and speed selector plate show age-related wear and surface oxidation. The stainless steel bowl is in good shape with normal use marks and minor scuffing on the interior. Both dough hook attachments show typical wear with a dull aluminum finish. The bowl lift mechanism and locking handle appear intact. Power cord is present. The data plate confirms Model H-600, Serial 11-154-577. Unit has not been tested - sold as-is. No flat beater or wire whip attachment included.

Eagle Group PDHT4-240-3 portable 4-well electric hot food serving table with enclosed sneeze guard. This unit is in used condition with stainless steel construction throughout and sits on a galvanized open base with casters for easy mobility. FEATURES: Retail Price: $5,280 • 4 full-size hot food wells with individual temperature control knobs • Enclosed glass sneeze guard with stainless steel overhead shelf • Portable design on heavy-duty swivel casters with galvanized undershelf • 240V, 3000 watts, 60Hz, single phase - 3-prong plug • NSF certified, UL listed, and made in the USA CONDITION: Unit is in good used condition rated 8/10. Stainless steel body is clean with minor surface scratching and light wear consistent with commercial use. All four control knobs are present and intact. Sneeze guard glass panels are clear and undamaged. Cutting board/tray slide on the serving side shows light wear. Galvanized undershelf and legs show some minor oxidation. Power cord and plug appear to be in good condition. Drain spout visible on the end panel. Overall a well-maintained unit ready for service.

Black mobile standing cart with height-adjustable top work surface, built-in storage compartment, and rolling casters. Manufactured by Ningbo Hooya Imp. & Exp. Group Co. Ltd with a production date of 10/2024. This unit appears to be in very good condition with minimal signs of use. FEATURES: Retail Price: $165 • Height-adjustable top surface with dual support posts and locking knobs • Rolling caster wheels on base for easy repositioning • Built-in storage cabinet with pull-knob door and open shelf above • Secondary mid-level shelf between top surface and cabinet • Black laminate finish - formaldehyde compliant per California 93120 Phase 2 and TSCA Title VI CONDITION: Unit is in very good overall condition consistent with an 8/10 rating. The black laminate surfaces show only minor scuffing and light surface wear. All adjustment knobs are present and functional. The storage door with round pull knob is intact. Caster wheels are in good working order. The curved base and side panels show no significant damage, chips, or structural issues. Production date label indicates 10/2024, suggesting this is a very recent unit with minimal use.

Commercial-grade wooden high chair in a walnut finish, showing moderate use consistent with a restaurant environment. The chair features a solid hardwood frame with a black nylon safety strap and is built in the classic stackable A-frame design commonly found in full-service dining establishments. FEATURES: Retail Price: $99 • Solid hardwood construction with warm walnut stain finish • Black nylon safety restraint strap with quick-release buckle • Wide A-frame base for stability on restaurant floors • Stackable design for easy storage • Contoured wooden backrest for child comfort CONDITION: Rated 7/10. The walnut finish shows general wear from regular commercial use, including minor scuffing and finish wear on the legs, crossbars, and seat surface. There is some light discoloration and surface scratching visible on the backrest and seat. The safety strap appears intact and functional. The overall structure is solid with no visible cracks, breaks, or loose joints. All crossbars and support rails are present and secure. A small sticker or label is visible on the lower front rail.

Red commercial rolling kick stool (step stool) in used condition. This two-tier round step stool features a steel body with red powder-coat finish, non-slip black rubber surfaces on both the top platform and lower step, and spring-loaded casters at the base that retract and lock when weight is applied. The unit shows general wear from use including scuffing and minor paint chips on the red finish, as well as some residual sticker/label marks on one of the support legs. FEATURES: Retail Price: $143 • Heavy-duty steel construction with red powder-coat finish • Two-step design with non-slip rubber top platform and lower step tread • Spring-loaded retractable casters - rolls freely when unoccupied, locks securely when stepped on • Rubber base bumper ring protects floors from damage • Compact round profile for easy storage in tight spaces CONDITION: Rated 8/10. The red powder-coat finish shows moderate scuffing, light scratches, and minor paint wear consistent with regular use. There are small sticker residue marks and a safety label visible on one of the support columns. The black rubber surfaces on both the top and lower step appear intact and functional. The rubber base bumper ring is present and in good shape. Overall structurally sound and fully functional.

Community Coffee branded wire cup and lid organizer rack in used condition. This freestanding unit features a five-tier wire frame for dispensing cups and a top-mounted black metal tray designated for lids, with a red Community Coffee branded label clearly visible on the front. FEATURES: Retail Price: $165 • Black powder-coated wire frame construction for durability • Five angled cup dispensing compartments for easy gravity-fed access • Top-mounted metal lid tray with red "LIDS" Community Coffee branded signage • Freestanding design with rubber-tipped stabilizing feet • Compact footprint suitable for coffee stations, convenience stores, or breakrooms CONDITION: Rated 8/10. The wire frame is structurally sound with no bent or broken wires. The black powder coating shows minor wear consistent with light use. The red Community Coffee "LIDS" label is intact and legible. The top lid tray appears to be in good shape with no visible dents or damage. Rubber feet are present on the legs. Overall a clean, functional unit showing only light signs of previous use.

Used wooden sink cover board measuring approximately 21" x 24". This solid wood cover is designed to sit over a commercial sink basin to provide additional prep or counter space when the sink is not in use. The board shows moderate wear consistent with regular use in a commercial kitchen environment. FEATURES: Retail Price: $94 • Solid wood construction • Approximately 21" x 24" dimensions • Two pre-drilled holes for mounting or drainage • Rounded corners for safety • Provides additional workspace over sink basins CONDITION: Rated 7/10. The wood surface shows visible scratching, scuffing, and surface wear throughout. There is some discoloration and staining on the top face, particularly darker marks near the upper portion. The edges show wear but remain structurally sound. Two drilled holes are present - one near the top edge and one near the bottom edge. The board appears flat and functional despite cosmetic wear.

Sapphire 3-compartment stainless steel sink with pre-rinse faucet assembly. This unit is in used condition with clearly labeled Wash, Rinse, and Sanitize compartments, and comes complete with an overhead pre-rinse spray unit, swing spout faucet, PVC drain lines, and flexible water supply connections. FEATURES: Retail Price: $1,540 • Three 18" x 18" stainless steel compartments labeled Wash, Rinse, and Sanitize • Pre-rinse overhead spray faucet with coil spring hose and squeeze handle • Wall-mount style add-on faucet with 12" swing spout and hot/cold handles • Heavy-gauge stainless steel body with backsplash • Galvanized tubular steel legs with adjustable bullet feet and cross bracing CONDITION: Rated 8/10. The stainless steel basins show light scratching and scuffing consistent with regular commercial use. The exterior front panels are clean with labels intact. The rear panel shows some cosmetic wear and minor paint chipping around the edges. The pre-rinse faucet and spray assembly are in good working shape with chrome finish intact. PVC drain plumbing and copper water supply lines are installed. All three drain strainers are present. Legs and feet show minor surface wear but are structurally sound. Overall a solid, functional unit ready for installation.

Miscellaneous lot of partially used commercial cleaning supplies contained in a black plastic storage crate. The lot includes a red sanitizer bucket, spray bottles, dispensing containers with lids, white tubing/hose, and additional cleaning accessories. Please view all pictures carefully and attend preview to inspect contents in person. FEATURES: Retail Price: $83 • Black plastic storage crate for convenient transport and organization • Red commercial-style bucket with pour spout and carry handle • White spray bottle for cleaning solution application • Assorted dispensing containers and lids • White flexible tubing/hose for cleaning system hookup CONDITION: Rated 8/10. This is a lot of partially used cleaning supplies. The red bucket shows minor scuffing and light wear consistent with use but remains fully functional. Spray bottles appear intact with triggers in place. Some items show signs of prior use including light staining and residue. The black plastic crate is in good structural condition with no cracks visible. All items appear complete and usable.

BK Resources 48" x 24" stainless steel work table (model VTT-4824) in used condition. The top surface shows moderate scratching consistent with regular commercial kitchen use, and the galvanized undershelf and legs show some light surface oxidation and wear marks. FEATURES: Retail Price: $308 • 18-gauge stainless steel flat top work surface - 48" x 24" • Galvanized undershelf provides additional storage space • Galvanized tubular legs with adjustable bullet feet for leveling • NSF certified for commercial foodservice environments • Standard 36" working height CONDITION: Rated 8/10. The stainless steel top shows moderate surface scratching from regular use but remains structurally sound with no dents or warping. The galvanized undershelf displays some light surface oxidation and minor wear spots. Legs show cosmetic wear including some surface corrosion near the base. All four adjustable feet are present and functional. Overall a solid, fully functional work table with normal commercial use wear.

Black epoxy-coated 5-tier wire shelving unit measuring approximately 36"W x 18"D x 72"H. The unit is fully assembled and standing upright in a warehouse setting. The shelving shows signs of prior use but remains structurally sound with all five shelves and four posts intact. FEATURES: Retail Price: $165 • 5-tier adjustable wire shelf design • Black epoxy-coated steel construction for corrosion resistance • 36"W x 18"D x 72"H overall dimensions • Adjustable shelf heights via snap-on split sleeve clips • Open wire design allows air circulation and reduces dust buildup CONDITION: Rated 7/10 - The unit is in used working condition. The black epoxy coating is mostly intact with some minor wear and light scuffing visible on the shelves and posts consistent with regular use. All five shelves are present and properly seated on the four corner posts. No significant bending, warping, or structural damage observed. The wire grid pattern on the shelves appears complete with no broken or missing wires. Some light surface dust is visible. Overall a functional shelving unit ready for continued service.

Black epoxy-coated 5-tier commercial wire shelving unit measuring approximately 48"W x 18"D x 72"H. The unit is fully assembled and standing upright as shown in photos. Note: staff reports 4 shelf clips are missing. FEATURES: Retail Price: $220 • 5-tier wire shelving with adjustable shelf positioning • Black epoxy-coated steel construction for corrosion resistance • 48"W x 18"D x 72"H overall dimensions • Open wire design promotes air circulation and visibility • Four sturdy vertical posts with clip-lock shelf attachment CONDITION: Unit is in used condition rated 7/10. The black epoxy coating shows general wear consistent with commercial use, including minor scuffing and light scratches visible on the shelves and posts. All five shelves and four posts are present and intact. Missing 4 shelf clips as noted by staff, which may affect shelf stability at certain positions but does not impair basic function. No significant rust, bending, or structural damage observed. The unit stands level and appears structurally sound overall.

5-tier chrome wire shelving unit on rolling casters. This commercial-grade shelving rack is in used condition with light wear consistent with regular use in a commercial kitchen or storage environment. FEATURES: Retail Price: $275 • 5 adjustable chrome wire shelves • 4 rolling casters (2 locking) for mobility • 48"W x 18"D x 75"H overall dimensions • Open wire shelf design promotes airflow and reduces dust accumulation • Heavy-duty chrome-plated steel construction CONDITION: Rated 8/10. The chrome finish is intact throughout with no significant rust or corrosion visible. Shelves and posts show minor scuffing and light wear from normal use. All five shelves are present and properly seated on the posts. Casters appear functional and in good working order. The unit is structurally sound and stands level. Some minor surface discoloration is visible on select shelves but overall the rack presents well for a used unit.

White powder-coated wire shelving rack with four tiers. This compact utility shelf is in good used condition with light wear consistent with prior use. Ideal for organizing supplies, small containers, or dry goods in a kitchen, prep area, or storage room. FEATURES: Retail Price: $50 • 4-tier open wire shelf design • White powder-coated steel frame and shelves • Compact dimensions - approximately 22"W x 12"D x 22"H • Curved tubular frame sides with rounded tops • Open grid shelving allows airflow and easy cleaning CONDITION: Rated 8/10. The white powder coating is intact with minor scuffing and light wear visible on the frame and shelf wires. No significant rust, bending, or structural damage observed. All four shelves appear straight and securely attached. The unit stands level and stable. Some minor marks and light discoloration consistent with normal use in a commercial environment.

LED neon-style "TACOS" sign featuring bright white lettering with a colorful taco graphic in yellow and green. The sign is mounted on a black acrylic backer panel and is shown fully illuminated and functioning in the photos. Includes the original 12V 5A AC/DC power adapter. FEATURES: Retail Price: $275 • LED neon-style illumination - white "TACOS" text, yellow taco shell and border, green lettuce accents • Black acrylic backer panel measuring approximately 36" x 17" • Included AC/DC adapter - Model BSG-60W1205000, input 100-240V 50/60Hz, output 12V 5.0A • Energy-efficient LED technology - no traditional neon gas tubes • Designed for indoor use - eye-catching wall-mount restaurant signage CONDITION: Sign is in excellent condition rated 9/10. All LED elements appear to be fully functional and evenly illuminated with no visible dead spots. The black acrylic backer shows some minor surface dust but no cracks or chips. Power cord and adapter are intact and in good working order. The rear of the sign shows clean construction with no visible damage.

Winco LED-10 oval LED "OPEN" sign in good working condition. The sign illuminates brightly with red lettering spelling "OPEN" surrounded by a blue LED border, as shown in the photos. Includes the original AC power adapter and pull-chain switch. FEATURES: Retail Price: $42 • Oval-shaped LED "OPEN" sign with transparent cover • Red and blue LED lights for high visibility • Pull-chain on/off switch for easy operation • Wall-mountable black plastic frame • Includes AC power adapter for standard outlet CONDITION: Rated 8/10. The sign is fully functional and lights up brightly as shown. The black plastic frame and back panel show minor scuffing and light dust accumulation. The transparent front cover is intact with no cracks. The power adapter shows normal wear. All LEDs appear to be operational with no dead spots visible. Label on back is intact and legible.

Classic red neon "LUNCH" sign manufactured by AlphaNEON (The AlphaSIGN Centre, Irving, TX). The sign is fully functional and illuminated in testing photos, displaying bright red neon lettering mounted on a black acrylic backer panel with a brushed aluminum border frame. A neon transformer is mounted to the rear of the panel and the unit is wired with a standard 3-prong plug for easy installation. FEATURES: Retail Price: $495 • Bright red neon glass tube lettering spelling "LUNCH" • Black acrylic backer panel with brushed aluminum frame surround • Built-in neon transformer mounted on rear of sign • Standard 3-prong electrical plug for plug-and-play operation • Manufactured by The AlphaSIGN Centre / AlphaNEON in Irving, TX CONDITION: Rated 8/10. The sign is in good working condition - all neon tubes are intact and illuminating brightly with no dim spots or flickering visible. The black backer panel shows minor surface wear. The brushed aluminum frame border has light scuffing consistent with use. The electrical plug shows age-related wear and some buildup on the prongs but the unit powers on and functions properly. The transformer housing on the rear shows minor dust and surface wear. Overall a solid, fully operational neon sign with normal signs of previous use.

BK Resources EETS-4830 stainless steel equipment stand designed to support commercial cooking equipment such as griddles, charbroilers, and fryers. The top surface shows some residue and staining from prior use, while the galvanized undershelf and legs show moderate wear consistent with a working kitchen environment. FEATURES: Retail Price: $385 • 48" x 30" stainless steel top with raised edges on all four sides • Galvanized steel undershelf for storage • Galvanized tubular legs with adjustable bullet feet for leveling • NSF certified for commercial foodservice use • Sturdy construction designed to support heavy cooking equipment CONDITION: Rated 8/10. The stainless steel top is intact and structurally sound but displays residue marks and light staining from previous equipment placement. The galvanized undershelf shows moderate discoloration and buildup. Legs and feet are in good working condition with some surface wear. All structural components are solid with no dents or bending observed. The unit would benefit from a thorough cleaning.

Set of four solid wood vertical slat back dining chairs in a dark walnut stain finish, commonly used in restaurants, cafes, and bars. These chairs show moderate use consistent with commercial service - the seats display visible wear, scratches, and finish loss on the seating surfaces, while the frames and slat backs remain structurally solid. FEATURES: Retail Price: $660 • Solid wood construction with dark walnut stain finish • Classic vertical slat back design - 5 slats per chair • Contoured solid wood saddle seat for comfort • Four-sided stretcher base provides structural rigidity • 18-inch seat height - standard dining chair height CONDITION: Rated 7/10. All four chairs are structurally sound with no wobble or loose joints visible. The solid wood seats show noticeable wear including surface scratches, finish wear, and some areas where the stain has worn through to the lighter wood beneath. The dark-stained frames and slat backs are in better condition with minor scuffs and edge wear consistent with regular commercial use. No broken slats or missing components observed. Overall a solid, functional set with cosmetic wear. Bid X 4

Set of four solid wood vertical slat back dining chairs in a dark walnut stain finish, commonly used in restaurants, cafes, and bars. These chairs show moderate use consistent with commercial service - the seats display visible wear, scratches, and finish loss on the seating surfaces, while the frames and slat backs remain structurally solid. FEATURES: Retail Price: $660 • Solid wood construction with dark walnut stain finish • Classic vertical slat back design - 5 slats per chair • Contoured solid wood saddle seat for comfort • Four-sided stretcher base provides structural rigidity • 18-inch seat height - standard dining chair height CONDITION: Rated 7/10. All four chairs are structurally sound with no wobble or loose joints visible. The solid wood seats show noticeable wear including surface scratches, finish wear, and some areas where the stain has worn through to the lighter wood beneath. The dark-stained frames and slat backs are in better condition with minor scuffs and edge wear consistent with regular commercial use. No broken slats or missing components observed. Overall a solid, functional set with cosmetic wear. Bid X 4

Set of four solid wood vertical slat back dining chairs in a dark walnut stain finish, commonly used in restaurants, cafes, and bars. These chairs show moderate use consistent with commercial service - the seats display visible wear, scratches, and finish loss on the seating surfaces, while the frames and slat backs remain structurally solid. FEATURES: Retail Price: $660 • Solid wood construction with dark walnut stain finish • Classic vertical slat back design - 5 slats per chair • Contoured solid wood saddle seat for comfort • Four-sided stretcher base provides structural rigidity • 18-inch seat height - standard dining chair height CONDITION: Rated 7/10. All four chairs are structurally sound with no wobble or loose joints visible. The solid wood seats show noticeable wear including surface scratches, finish wear, and some areas where the stain has worn through to the lighter wood beneath. The dark-stained frames and slat backs are in better condition with minor scuffs and edge wear consistent with regular commercial use. No broken slats or missing components observed. Overall a solid, functional set with cosmetic wear. Bid X 4

Set of four solid wood vertical slat back dining chairs in a dark walnut stain finish, commonly used in restaurants, cafes, and bars. These chairs show moderate use consistent with commercial service - the seats display visible wear, scratches, and finish loss on the seating surfaces, while the frames and slat backs remain structurally solid. FEATURES: Retail Price: $660 • Solid wood construction with dark walnut stain finish • Classic vertical slat back design - 5 slats per chair • Contoured solid wood saddle seat for comfort • Four-sided stretcher base provides structural rigidity • 18-inch seat height - standard dining chair height CONDITION: Rated 7/10. All four chairs are structurally sound with no wobble or loose joints visible. The solid wood seats show noticeable wear including surface scratches, finish wear, and some areas where the stain has worn through to the lighter wood beneath. The dark-stained frames and slat backs are in better condition with minor scuffs and edge wear consistent with regular commercial use. No broken slats or missing components observed. Overall a solid, functional set with cosmetic wear. Bid X 4

Set of four solid wood vertical slat back dining chairs in a dark walnut stain finish, commonly used in restaurants, cafes, and bars. These chairs show moderate use consistent with commercial service - the seats display visible wear, scratches, and finish loss on the seating surfaces, while the frames and slat backs remain structurally solid. FEATURES: Retail Price: $660 • Solid wood construction with dark walnut stain finish • Classic vertical slat back design - 5 slats per chair • Contoured solid wood saddle seat for comfort • Four-sided stretcher base provides structural rigidity • 18-inch seat height - standard dining chair height CONDITION: Rated 7/10. All four chairs are structurally sound with no wobble or loose joints visible. The solid wood seats show noticeable wear including surface scratches, finish wear, and some areas where the stain has worn through to the lighter wood beneath. The dark-stained frames and slat backs are in better condition with minor scuffs and edge wear consistent with regular commercial use. No broken slats or missing components observed. Overall a solid, functional set with cosmetic wear. Bid X 4

Set of four solid wood vertical slat back dining chairs in a dark walnut stain finish, commonly used in restaurants, cafes, and bars. These chairs show moderate use consistent with commercial service - the seats display visible wear, scratches, and finish loss on the seating surfaces, while the frames and slat backs remain structurally solid. FEATURES: Retail Price: $660 • Solid wood construction with dark walnut stain finish • Classic vertical slat back design - 5 slats per chair • Contoured solid wood saddle seat for comfort • Four-sided stretcher base provides structural rigidity • 18-inch seat height - standard dining chair height CONDITION: Rated 7/10. All four chairs are structurally sound with no wobble or loose joints visible. The solid wood seats show noticeable wear including surface scratches, finish wear, and some areas where the stain has worn through to the lighter wood beneath. The dark-stained frames and slat backs are in better condition with minor scuffs and edge wear consistent with regular commercial use. No broken slats or missing components observed. Overall a solid, functional set with cosmetic wear. Bid X 4