Big Orange Sheep Recording Studio Equipment Consol and Monitor Auction

Solid State Logic mixing console. Model: SSL J9064. 64 Channel Console w/ Power Supply + All Cables, Old Power Supply, Cable Package & Many Spares. Check all photos, so many extras. Brand new never used Atomic 9k Power supply. Eight Service and User Manuals. All wires and extra parts included. This is a beautiful 64 channel SSL J9064 console. This was picked up from Big Orange Sheep Recording Studio in Brooklyn and was ready for commissioning and waiting on final grounding inspection. The console has been taken apart in two sections for easier transport and to remove from the building in Brooklyn. This is a truly beautiful console. The console was purchased by them from Sphere Recording Consoles Inc in Nashville Tennessee in June of 2022 before Orange Sheep studio had to recently close. This equipment was constantly being worked on and not just sitting around. All of the channels and faders are in great working condition. -The trim was saved and removed from the original wood legs awaiting being redone completely with leather. The original leather has been saved but weathered over the years. -Brand new Atomic 9K, XL Power Supply was purchased June 2022; This was a $11,649.00 upgrade and makes a world of difference. INCLUDED IN THIS SALE: -SSL 64 Channel Console with Atomic Power Supply, Patch Bay, DL Looms, Manuals and so much more. -Complete cable package: 64 channels of SSL factory oxygen free DL to DB25 I/O cable looms, 64 channels of Mogami DL to XLR I/O. Dimensions: 140" x 60" x 60" Originally: $62,649.00

New in Box Aktiver Subwoofer. The KH 750 has a unique and flexible onboard 2.0/0.1 Bass Manager that allows for it to be used in many different system configurations. The rear panel is equipped with both analog and digital inputs and outputs, four routing modes, fourth-order DSP crossovers, and acoustical controls for seamless system and room integration. Neumann KH 750 10-inch Powered Studio Subwoofer Features: -Decreases bass extension and increases maximum SPL of main monitor loudspeakers. -Decreases harmonic and intermodulation distortion of main monitors. -Reproduces LFE channel; sub signal of a bass-managed multichannel source. -Ideal for Plane Wave bass array system. -Full functionality access via Neumann Control software. -Onboard 256W amplification; 105dB SPL. -Frequency response: 18–300Hz. -Works as an extension for Neumann KH 810, KH 870, and KH 805 subwoofer systems. -Includes mains cables (US, UK, EU), Quick Guide, and safety booklet. Powered: Yes. -Speaker Size: 10". -Driver Type: Long-throw with Pressed-steel basket. -Total Power : 256W. -Frequency Range: 20Hz-300Hz. -Crossover Frequency: 80Hz. -Maximum Peak SPL: 105 dB SPL @ 1m. -Input Types: 2 x XLR. -Output Types: 2 x XLR. -Other I/O: AES3 In/Out (digital). Weight: 43 lbs. Manufacturer Part Number: 508296 Dimensions: 13" x 15" x 15" Originally: $1,750.00

Brand new in the box. Ex Machina Quasar Mkii Dual 8" Coaxial 3 Way Monitor (Pair). Ex Machina Soundworks Quasar MKII 3-way Dual 8-inch Active Studio Monitor Features: -Sealed, highly braced Valchromat cabinet is more acoustically inert than MDF or plywood enclosures. -SHARC DSP provides ultra-precise digital crossovers, protection limiters, and proprietary phase and magnitude calibration technology. -High-performance AKM Velvet Sound converters ensure a pristine AD/DA path. -Signature 18cm coaxial mid- and high-frequency drive unit offers a super-wide listening sweet spot and a life-like center image. -Midrange range driver acts as an optimized waveguide for the concentric tweeter. -Composite Sound Metamodal TX diaphragm tweeter exhibits a superb transient response and ample detail without harshness. -22cm subwoofer, designed and built by SEAS exclusively for Ex Machina Soundworks, provides the powerful, articulate thump of a large driver in a more compact form. Sealed cabinet delivers punchy and accurate sound: Ex Machina Soundworks houses all their monitors in sealed, highly braced cabinets constructed from Valchromat. This innovative wood fiber panel uses a special binding resin for enhanced rigidity, yielding a cabinet that is more acoustically inert than MDF or plywood enclosures. In combination with Ex Machina Soundworks’ clever design, this material mitigates the group delay and turbulence present in many traditional ported monitors. SHARC-powered DSP for digital crossover and calibration: Every Ex Machina Soundworks monitor is outfitted with an individual SHARC processor, the industry standard for premium-quality DSP. Ex Machina Soundworks leverages the power of SHARC DSP for their ultra-precise digital crossovers, protection limiters, and proprietary phase and magnitude calibration technology. To ensure a pristine AD/DA path, Ex Machina Soundworks chooses high-performance AKM Velvet Sound converters, the same converters found in many top-tier audio interfaces carried at Sweetwater. Listed Features: -Powered: Yes. -Power Configuration: Tri-amped. -Quantity: Pair. -LF Driver Size: 2 x 9" Woofer. -LF Driver Type: Aluminum. -MF Driver Size: 7" Midrange. -MF Driver Type: Composite Sound Metamodal TX. -HF Driver Size: 1" Tweeter. -HF Driver Type: -Composite Sound Medamodal TX. -LF Driver Power Amp: 500W RMS. -MF Driver Power Amp: 125W RMS. -HF Driver Power Amp: 75W RMS. -Total Power: 700W. -Frequency Response: 29Hz-32kHz (±1dB). -Crossover Frequency: 200Hz (subs/mid), 2kHz (mid/tweeter). -Maximum Peak SPL: 114 dB SPL @ 1m. -Input Types: 1 x XLR. -USB: 1 x Type B (firmware only). -Features: SHARC-based DSP Crossover and Calibration. -Enclosure Type: Sealed. -Enclosure Material: Valchromat Wood. Dimensions: 11" x 13.5" x 29" Originally: $12,999.00

SPL MC16 Mastering Monitor Controller never used and new in the box. SPL MC16 Mastering Monitor Controller Features: -Analog 16-channel monitor controller for mastering. -Integrates with DMC Stereo. -Mastering Console for compatibility with immersive audio formats such as Dolby Atmos and Auro 3D. -120V DC audio rail, 5G Supra op-amps. -16 speaker outputs on XLR. -3 speaker array and 3 solo presets Label foil. -2 rows of 16 channel inputs (XLR and DB-25). -Solo, Dim, and Mute functions. -Custom 16-gang potentiometer. Tech Specs: -Input Channels: 16. -Output Channels: 16. -Analog Inputs: 8 x XLR (input A, channels 1-8), 1 x DB-25 (input A, channels 9-16), 2 x DB-25 (input B, channels 1-16). -Analog Outputs: 16 x XLR. -Form Factor: Rackmount. -Power Supply: Standard IEC AC Cable. Weight: 18.51 lbs. Manufacturer Part Number: 1764 Overview: The MC16 Mastering Monitor Controller offers monitoring of up to 16 channels, and features the world's first 16-gang precision potentiometer that was specially designed for SPL. The MC16 has been designed for integrating multi-channel monitoring into a stereo mastering environment, allowing you to expand the channel count for surround and immersive audio monitoring. Ideal for mastering studios, the combination of the SPL MC16 and DMC allows mastering studios to work in all current audio playback formats at the same level of quality, without needing to reconnect any speakers, making them perfect for use in post production.

Neumann KH 120 DSP Powered Studio Monitor Speaker never used in the box. Mathematically Modeled Dispersion waveguide: The magnetically shielded aluminum cabinet is loaded with a long-throw, composite-sandwich 5.25-inch woofer and a titanium-fabric 1-inch dome tweeter. A 145-watt amplifier drives the woofer, while the tweeter obtains its power from a 100-watt amp. The front baffle incorporates Neumann’s Mathematically Modeled Dispersion (MMD) waveguide, which helps produce a broad sweet spot and smooth off-axis response. In a stereo configuration, the KH 120 delivers rock-solid imaging with a satisfying sense of depth. The KH 120 exhibits a smooth, natural frequency response, delivering bass amazingly well for its diminutive size. Its midrange presentation is detailed and revealing, neither overly forward nor recessive. The KH 120 is fitted with a full complement of control settings for integration into a variety of acoustical environments. You can confidently make critical EQ and mix placement decisions with this speaker. -Powered: Yes. -Power Configuration: Bi-amped. -Quantity: Single. -LF Driver Size: 5.25" Woofer. -LF Driver Type: Magnetically shielded. -HF Driver Size: 1" Tweeter. -LF Driver Power Amp: 145W. -HF Driver Power Amp: 100W. -Total Power: 245W. -Frequency Response: 44Hz-21kHz (±3 dB). -Crossover Frequency: 1.7kHz. -Maximum Peak SPL: 116.8 dB SPL. -Input Types: 1 x XLR, 1 x Coax (S/PDIF). -Output Types: 1 x Coax (S/PDIF). -Other I/O: 1 x RJ45 (Ethernet Control Network). -Features: DIP switches, Tilt, Input Gain, Input Selector. -Software: Neumann MA 1 Monitor Alignment App. -Enclosure Type: Front Ported. Monitor Features: -Small-format nearfield monitor with high SPL capability and deep bass extension to 44Hz. -DSP engine for improved performance and automatic room alignment. -Analog and S/PDIF connectivity (optional AES67). -High-precision drivers, Mathematically Modeled Dispersion (MMD) waveguide. -Razor-sharp imaging due to extremely low tolerances (±0.5dB) May be combined with other KH series speakers in immersive or surround setups. -Linear frequency response: 44Hz–21kHz (±3dB). -Linear phase response: 120Hz–16kHz (±45°) with latency <2.6 ms. -Free-field frequency response: 44Hz–21kHz (±3dB). -Self-generated noise @ 10cm: <20dB(A) SPL (with input gain set to 100dB SPL for 0dBu). -Max. SPL (half space, 3% THD at 1m): 116.8dB SPL (averaged between 100Hz and 6kHz). -Acoustical Principle: bass reflex, front-baffle ports. -Analog input(s): XLR (analog, electronically balanced). -Analog input impedance: 24k ohms. -Digital input(s): S/PDIF; RCA (75 Ω). -Input gain control (sensitivity): 0dB–15dB. -Output level control: 94, 100, 108, and 114dB SPL (with 0dBu input level). -EQ, Bass: 0, -2, -4, -6dB. -EQ, Low-Mid: 0, -2, -4, -6dB. -EQ, Treble: +1, 0, -1, -2dB. -Control: Local; Network. -Crossover frequency: 1.7kHz. -FIR phase correction: Linear phase (120Hz–16kHz; +/- 45°). -Output power, woofer amplifier: 145W (THD+N with limiter deactivated: 10%). -Output power, tweeter amplifier: 100W (THD+N with limiter deactivated: 10%). -Woofer: 5.25-inch, with protective metal grille. -Tweeter: 1-inch, with protective metal grille. -Includes US mains cable, 4 self-adhesive feet.

Neumann KH 120 DSP Powered Studio never used in the box. Mathematically Modeled Dispersion waveguide: The magnetically shielded aluminum cabinet is loaded with a long-throw, composite-sandwich 5.25-inch woofer and a titanium-fabric 1-inch dome tweeter. A 145-watt amplifier drives the woofer, while the tweeter obtains its power from a 100-watt amp. The front baffle incorporates Neumann’s Mathematically Modeled Dispersion (MMD) waveguide, which helps produce a broad sweet spot and smooth off-axis response. In a stereo configuration, the KH 120 delivers rock-solid imaging with a satisfying sense of depth. The KH 120 exhibits a smooth, natural frequency response, delivering bass amazingly well for its diminutive size. Its midrange presentation is detailed and revealing, neither overly forward nor recessive. The KH 120 is fitted with a full complement of control settings for integration into a variety of acoustical environments. You can confidently make critical EQ and mix placement decisions with this speaker. -Powered: Yes. -Power Configuration: Bi-amped. -Quantity: Single. -LF Driver Size: 5.25" Woofer. -LF Driver Type: Magnetically shielded. -HF Driver Size: 1" Tweeter. -LF Driver Power Amp: 145W. -HF Driver Power Amp: 100W. -Total Power: 245W. -Frequency Response: 44Hz-21kHz (±3 dB). -Crossover Frequency: 1.7kHz. -Maximum Peak SPL: 116.8 dB SPL. -Input Types: 1 x XLR, 1 x Coax (S/PDIF). -Output Types: 1 x Coax (S/PDIF). -Other I/O: 1 x RJ45 (Ethernet Control Network). -Features: DIP switches, Tilt, Input Gain, Input Selector. -Software: Neumann MA 1 Monitor Alignment App. -Enclosure Type: Front Ported. Monitor Features: -Small-format nearfield monitor with high SPL capability and deep bass extension to 44Hz. -DSP engine for improved performance and automatic room alignment. -Analog and S/PDIF connectivity (optional AES67). -High-precision drivers, Mathematically Modeled Dispersion (MMD) waveguide. -Razor-sharp imaging due to extremely low tolerances (±0.5dB) May be combined with other KH series speakers in immersive or surround setups. -Linear frequency response: 44Hz–21kHz (±3dB). -Linear phase response: 120Hz–16kHz (±45°) with latency <2.6 ms. -Free-field frequency response: 44Hz–21kHz (±3dB). -Self-generated noise @ 10cm: <20dB(A) SPL (with input gain set to 100dB SPL for 0dBu). -Max. SPL (half space, 3% THD at 1m): 116.8dB SPL (averaged between 100Hz and 6kHz). -Acoustical Principle: bass reflex, front-baffle ports. -Analog input(s): XLR (analog, electronically balanced). -Analog input impedance: 24k ohms. -Digital input(s): S/PDIF; RCA (75 Ω). -Input gain control (sensitivity): 0dB–15dB. -Output level control: 94, 100, 108, and 114dB SPL (with 0dBu input level). -EQ, Bass: 0, -2, -4, -6dB. -EQ, Low-Mid: 0, -2, -4, -6dB. -EQ, Treble: +1, 0, -1, -2dB. -Control: Local; Network. -Crossover frequency: 1.7kHz. -FIR phase correction: Linear phase (120Hz–16kHz; +/- 45°). -Output power, woofer amplifier: 145W (THD+N with limiter deactivated: 10%). -Output power, tweeter amplifier: 100W (THD+N with limiter deactivated: 10%). -Woofer: 5.25-inch, with protective metal grille. -Tweeter: 1-inch, with protective metal grille. -Includes US mains cable, 4 self-adhesive feet.

Neumann KH 120 DSP Powered Studio Monitor/Speaker never used in the box. Mathematically Modeled Dispersion waveguide: The magnetically shielded aluminum cabinet is loaded with a long-throw, composite-sandwich 5.25-inch woofer and a titanium-fabric 1-inch dome tweeter. A 145-watt amplifier drives the woofer, while the tweeter obtains its power from a 100-watt amp. The front baffle incorporates Neumann’s Mathematically Modeled Dispersion (MMD) waveguide, which helps produce a broad sweet spot and smooth off-axis response. In a stereo configuration, the KH 120 delivers rock-solid imaging with a satisfying sense of depth. The KH 120 exhibits a smooth, natural frequency response, delivering bass amazingly well for its diminutive size. Its midrange presentation is detailed and revealing, neither overly forward nor recessive. The KH 120 is fitted with a full complement of control settings for integration into a variety of acoustical environments. You can confidently make critical EQ and mix placement decisions with this speaker. -Powered: Yes. -Power Configuration: Bi-amped. -Quantity: Single. -LF Driver Size: 5.25" Woofer. -LF Driver Type: Magnetically shielded. -HF Driver Size: 1" Tweeter. -LF Driver Power Amp: 145W. -HF Driver Power Amp: 100W. -Total Power: 245W. -Frequency Response: 44Hz-21kHz (±3 dB). -Crossover Frequency: 1.7kHz. -Maximum Peak SPL: 116.8 dB SPL. -Input Types: 1 x XLR, 1 x Coax (S/PDIF). -Output Types: 1 x Coax (S/PDIF). -Other I/O: 1 x RJ45 (Ethernet Control Network). -Features: DIP switches, Tilt, Input Gain, Input Selector. -Software: Neumann MA 1 Monitor Alignment App. -Enclosure Type: Front Ported. Monitor Features: -Small-format nearfield monitor with high SPL capability and deep bass extension to 44Hz. -DSP engine for improved performance and automatic room alignment. -Analog and S/PDIF connectivity (optional AES67). -High-precision drivers, Mathematically Modeled Dispersion (MMD) waveguide. -Razor-sharp imaging due to extremely low tolerances (±0.5dB) May be combined with other KH series speakers in immersive or surround setups. -Linear frequency response: 44Hz–21kHz (±3dB). -Linear phase response: 120Hz–16kHz (±45°) with latency <2.6 ms. -Free-field frequency response: 44Hz–21kHz (±3dB). -Self-generated noise @ 10cm: <20dB(A) SPL (with input gain set to 100dB SPL for 0dBu). -Max. SPL (half space, 3% THD at 1m): 116.8dB SPL (averaged between 100Hz and 6kHz). -Acoustical Principle: bass reflex, front-baffle ports. -Analog input(s): XLR (analog, electronically balanced). -Analog input impedance: 24k ohms. -Digital input(s): S/PDIF; RCA (75 Ω). -Input gain control (sensitivity): 0dB–15dB. -Output level control: 94, 100, 108, and 114dB SPL (with 0dBu input level). -EQ, Bass: 0, -2, -4, -6dB. -EQ, Low-Mid: 0, -2, -4, -6dB. -EQ, Treble: +1, 0, -1, -2dB. -Control: Local; Network. -Crossover frequency: 1.7kHz. -FIR phase correction: Linear phase (120Hz–16kHz; +/- 45°). -Output power, woofer amplifier: 145W (THD+N with limiter deactivated: 10%). -Output power, tweeter amplifier: 100W (THD+N with limiter deactivated: 10%). -Woofer: 5.25-inch, with protective metal grille. -Tweeter: 1-inch, with protective metal grille. -Includes US mains cable, 4 self-adhesive feet. Dimension: 7" x 9" x 11" Originally: $999.00

Neumann KH 120 DSP Powered Studio Monitor/Speaker never used in the box. Mathematically Modeled Dispersion waveguide: The magnetically shielded aluminum cabinet is loaded with a long-throw, composite-sandwich 5.25-inch woofer and a titanium-fabric 1-inch dome tweeter. A 145-watt amplifier drives the woofer, while the tweeter obtains its power from a 100-watt amp. The front baffle incorporates Neumann’s Mathematically Modeled Dispersion (MMD) waveguide, which helps produce a broad sweet spot and smooth off-axis response. In a stereo configuration, the KH 120 delivers rock-solid imaging with a satisfying sense of depth. The KH 120 exhibits a smooth, natural frequency response, delivering bass amazingly well for its diminutive size. Its midrange presentation is detailed and revealing, neither overly forward nor recessive. The KH 120 is fitted with a full complement of control settings for integration into a variety of acoustical environments. You can confidently make critical EQ and mix placement decisions with this speaker. -Powered: Yes. -Power Configuration: Bi-amped. -Quantity: Single. -LF Driver Size: 5.25" Woofer. -LF Driver Type: Magnetically shielded. -HF Driver Size: 1" Tweeter. -LF Driver Power Amp: 145W. -HF Driver Power Amp: 100W. -Total Power: 245W. -Frequency Response: 44Hz-21kHz (±3 dB). -Crossover Frequency: 1.7kHz. -Maximum Peak SPL: 116.8 dB SPL. -Input Types: 1 x XLR, 1 x Coax (S/PDIF). -Output Types: 1 x Coax (S/PDIF). -Other I/O: 1 x RJ45 (Ethernet Control Network). -Features: DIP switches, Tilt, Input Gain, Input Selector. -Software: Neumann MA 1 Monitor Alignment App. -Enclosure Type: Front Ported. Monitor Features: -Small-format nearfield monitor with high SPL capability and deep bass extension to 44Hz. -DSP engine for improved performance and automatic room alignment. -Analog and S/PDIF connectivity (optional AES67). -High-precision drivers, Mathematically Modeled Dispersion (MMD) waveguide. -Razor-sharp imaging due to extremely low tolerances (±0.5dB) May be combined with other KH series speakers in immersive or surround setups. -Linear frequency response: 44Hz–21kHz (±3dB). -Linear phase response: 120Hz–16kHz (±45°) with latency <2.6 ms. -Free-field frequency response: 44Hz–21kHz (±3dB). -Self-generated noise @ 10cm: <20dB(A) SPL (with input gain set to 100dB SPL for 0dBu). -Max. SPL (half space, 3% THD at 1m): 116.8dB SPL (averaged between 100Hz and 6kHz). -Acoustical Principle: bass reflex, front-baffle ports. -Analog input(s): XLR (analog, electronically balanced). -Analog input impedance: 24k ohms. -Digital input(s): S/PDIF; RCA (75 Ω). -Input gain control (sensitivity): 0dB–15dB. -Output level control: 94, 100, 108, and 114dB SPL (with 0dBu input level). -EQ, Bass: 0, -2, -4, -6dB. -EQ, Low-Mid: 0, -2, -4, -6dB. -EQ, Treble: +1, 0, -1, -2dB. -Control: Local; Network. -Crossover frequency: 1.7kHz. -FIR phase correction: Linear phase (120Hz–16kHz; +/- 45°). -Output power, woofer amplifier: 145W (THD+N with limiter deactivated: 10%). -Output power, tweeter amplifier: 100W (THD+N with limiter deactivated: 10%). -Woofer: 5.25-inch, with protective metal grille. -Tweeter: 1-inch, with protective metal grille. -Includes US mains cable, 4 self-adhesive feet. Dimension: 7" x 9" x 11" Originally: $999.00

Neumann KH 120 DSP Powered Studio Monitor/Speaker never used in the box. Mathematically Modeled Dispersion waveguide: The magnetically shielded aluminum cabinet is loaded with a long-throw, composite-sandwich 5.25-inch woofer and a titanium-fabric 1-inch dome tweeter. A 145-watt amplifier drives the woofer, while the tweeter obtains its power from a 100-watt amp. The front baffle incorporates Neumann’s Mathematically Modeled Dispersion (MMD) waveguide, which helps produce a broad sweet spot and smooth off-axis response. In a stereo configuration, the KH 120 delivers rock-solid imaging with a satisfying sense of depth. The KH 120 exhibits a smooth, natural frequency response, delivering bass amazingly well for its diminutive size. Its midrange presentation is detailed and revealing, neither overly forward nor recessive. The KH 120 is fitted with a full complement of control settings for integration into a variety of acoustical environments. You can confidently make critical EQ and mix placement decisions with this speaker. -Powered: Yes. -Power Configuration: Bi-amped. -Quantity: Single. -LF Driver Size: 5.25" Woofer. -LF Driver Type: Magnetically shielded. -HF Driver Size: 1" Tweeter. -LF Driver Power Amp: 145W. -HF Driver Power Amp: 100W. -Total Power: 245W. -Frequency Response: 44Hz-21kHz (±3 dB). -Crossover Frequency: 1.7kHz. -Maximum Peak SPL: 116.8 dB SPL. -Input Types: 1 x XLR, 1 x Coax (S/PDIF). -Output Types: 1 x Coax (S/PDIF). -Other I/O: 1 x RJ45 (Ethernet Control Network). -Features: DIP switches, Tilt, Input Gain, Input Selector. -Software: Neumann MA 1 Monitor Alignment App. -Enclosure Type: Front Ported. Monitor Features: -Small-format nearfield monitor with high SPL capability and deep bass extension to 44Hz. -DSP engine for improved performance and automatic room alignment. -Analog and S/PDIF connectivity (optional AES67). -High-precision drivers, Mathematically Modeled Dispersion (MMD) waveguide. -Razor-sharp imaging due to extremely low tolerances (±0.5dB) May be combined with other KH series speakers in immersive or surround setups. -Linear frequency response: 44Hz–21kHz (±3dB). -Linear phase response: 120Hz–16kHz (±45°) with latency <2.6 ms. -Free-field frequency response: 44Hz–21kHz (±3dB). -Self-generated noise @ 10cm: <20dB(A) SPL (with input gain set to 100dB SPL for 0dBu). -Max. SPL (half space, 3% THD at 1m): 116.8dB SPL (averaged between 100Hz and 6kHz). -Acoustical Principle: bass reflex, front-baffle ports. -Analog input(s): XLR (analog, electronically balanced). -Analog input impedance: 24k ohms. -Digital input(s): S/PDIF; RCA (75 Ω). -Input gain control (sensitivity): 0dB–15dB. -Output level control: 94, 100, 108, and 114dB SPL (with 0dBu input level). -EQ, Bass: 0, -2, -4, -6dB. -EQ, Low-Mid: 0, -2, -4, -6dB. -EQ, Treble: +1, 0, -1, -2dB. -Control: Local; Network. -Crossover frequency: 1.7kHz. -FIR phase correction: Linear phase (120Hz–16kHz; +/- 45°). -Output power, woofer amplifier: 145W (THD+N with limiter deactivated: 10%). -Output power, tweeter amplifier: 100W (THD+N with limiter deactivated: 10%). -Woofer: 5.25-inch, with protective metal grille. -Tweeter: 1-inch, with protective metal grille. -Includes US mains cable, 4 self-adhesive feet. Dimension: 7" x 9" x 11" Originally: $999.00

Neumann KH 120 DSP Powered Studio Monitor/Speaker never used in the box. Mathematically Modeled Dispersion waveguide: The magnetically shielded aluminum cabinet is loaded with a long-throw, composite-sandwich 5.25-inch woofer and a titanium-fabric 1-inch dome tweeter. A 145-watt amplifier drives the woofer, while the tweeter obtains its power from a 100-watt amp. The front baffle incorporates Neumann’s Mathematically Modeled Dispersion (MMD) waveguide, which helps produce a broad sweet spot and smooth off-axis response. In a stereo configuration, the KH 120 delivers rock-solid imaging with a satisfying sense of depth. The KH 120 exhibits a smooth, natural frequency response, delivering bass amazingly well for its diminutive size. Its midrange presentation is detailed and revealing, neither overly forward nor recessive. The KH 120 is fitted with a full complement of control settings for integration into a variety of acoustical environments. You can confidently make critical EQ and mix placement decisions with this speaker. -Powered: Yes. -Power Configuration: Bi-amped. -Quantity: Single. -LF Driver Size: 5.25" Woofer. -LF Driver Type: Magnetically shielded. -HF Driver Size: 1" Tweeter. -LF Driver Power Amp: 145W. -HF Driver Power Amp: 100W. -Total Power: 245W. -Frequency Response: 44Hz-21kHz (±3 dB). -Crossover Frequency: 1.7kHz. -Maximum Peak SPL: 116.8 dB SPL. -Input Types: 1 x XLR, 1 x Coax (S/PDIF). -Output Types: 1 x Coax (S/PDIF). -Other I/O: 1 x RJ45 (Ethernet Control Network). -Features: DIP switches, Tilt, Input Gain, Input Selector. -Software: Neumann MA 1 Monitor Alignment App. -Enclosure Type: Front Ported. Monitor Features: -Small-format nearfield monitor with high SPL capability and deep bass extension to 44Hz. -DSP engine for improved performance and automatic room alignment. -Analog and S/PDIF connectivity (optional AES67). -High-precision drivers, Mathematically Modeled Dispersion (MMD) waveguide. -Razor-sharp imaging due to extremely low tolerances (±0.5dB) May be combined with other KH series speakers in immersive or surround setups. -Linear frequency response: 44Hz–21kHz (±3dB). -Linear phase response: 120Hz–16kHz (±45°) with latency <2.6 ms. -Free-field frequency response: 44Hz–21kHz (±3dB). -Self-generated noise @ 10cm: <20dB(A) SPL (with input gain set to 100dB SPL for 0dBu). -Max. SPL (half space, 3% THD at 1m): 116.8dB SPL (averaged between 100Hz and 6kHz). -Acoustical Principle: bass reflex, front-baffle ports. -Analog input(s): XLR (analog, electronically balanced). -Analog input impedance: 24k ohms. -Digital input(s): S/PDIF; RCA (75 Ω). -Input gain control (sensitivity): 0dB–15dB. -Output level control: 94, 100, 108, and 114dB SPL (with 0dBu input level). -EQ, Bass: 0, -2, -4, -6dB. -EQ, Low-Mid: 0, -2, -4, -6dB. -EQ, Treble: +1, 0, -1, -2dB. -Control: Local; Network. -Crossover frequency: 1.7kHz. -FIR phase correction: Linear phase (120Hz–16kHz; +/- 45°). -Output power, woofer amplifier: 145W (THD+N with limiter deactivated: 10%). -Output power, tweeter amplifier: 100W (THD+N with limiter deactivated: 10%). -Woofer: 5.25-inch, with protective metal grille. -Tweeter: 1-inch, with protective metal grille. -Includes US mains cable, 4 self-adhesive feet. Dimension: 7" x 9" x 11" Originally: $999.00

Neumann KH 120 DSP Powered Studio Monitor/Speaker never used in the box. Mathematically Modeled Dispersion waveguide: The magnetically shielded aluminum cabinet is loaded with a long-throw, composite-sandwich 5.25-inch woofer and a titanium-fabric 1-inch dome tweeter. A 145-watt amplifier drives the woofer, while the tweeter obtains its power from a 100-watt amp. The front baffle incorporates Neumann’s Mathematically Modeled Dispersion (MMD) waveguide, which helps produce a broad sweet spot and smooth off-axis response. In a stereo configuration, the KH 120 delivers rock-solid imaging with a satisfying sense of depth. The KH 120 exhibits a smooth, natural frequency response, delivering bass amazingly well for its diminutive size. Its midrange presentation is detailed and revealing, neither overly forward nor recessive. The KH 120 is fitted with a full complement of control settings for integration into a variety of acoustical environments. You can confidently make critical EQ and mix placement decisions with this speaker. -Powered: Yes. -Power Configuration: Bi-amped. -Quantity: Single. -LF Driver Size: 5.25" Woofer. -LF Driver Type: Magnetically shielded. -HF Driver Size: 1" Tweeter. -LF Driver Power Amp: 145W. -HF Driver Power Amp: 100W. -Total Power: 245W. -Frequency Response: 44Hz-21kHz (±3 dB). -Crossover Frequency: 1.7kHz. -Maximum Peak SPL: 116.8 dB SPL. -Input Types: 1 x XLR, 1 x Coax (S/PDIF). -Output Types: 1 x Coax (S/PDIF). -Other I/O: 1 x RJ45 (Ethernet Control Network). -Features: DIP switches, Tilt, Input Gain, Input Selector. -Software: Neumann MA 1 Monitor Alignment App. -Enclosure Type: Front Ported. Monitor Features: -Small-format nearfield monitor with high SPL capability and deep bass extension to 44Hz. -DSP engine for improved performance and automatic room alignment. -Analog and S/PDIF connectivity (optional AES67). -High-precision drivers, Mathematically Modeled Dispersion (MMD) waveguide. -Razor-sharp imaging due to extremely low tolerances (±0.5dB) May be combined with other KH series speakers in immersive or surround setups. -Linear frequency response: 44Hz–21kHz (±3dB). -Linear phase response: 120Hz–16kHz (±45°) with latency <2.6 ms. -Free-field frequency response: 44Hz–21kHz (±3dB). -Self-generated noise @ 10cm: <20dB(A) SPL (with input gain set to 100dB SPL for 0dBu). -Max. SPL (half space, 3% THD at 1m): 116.8dB SPL (averaged between 100Hz and 6kHz). -Acoustical Principle: bass reflex, front-baffle ports. -Analog input(s): XLR (analog, electronically balanced). -Analog input impedance: 24k ohms. -Digital input(s): S/PDIF; RCA (75 Ω). -Input gain control (sensitivity): 0dB–15dB. -Output level control: 94, 100, 108, and 114dB SPL (with 0dBu input level). -EQ, Bass: 0, -2, -4, -6dB. -EQ, Low-Mid: 0, -2, -4, -6dB. -EQ, Treble: +1, 0, -1, -2dB. -Control: Local; Network. -Crossover frequency: 1.7kHz. -FIR phase correction: Linear phase (120Hz–16kHz; +/- 45°). -Output power, woofer amplifier: 145W (THD+N with limiter deactivated: 10%). -Output power, tweeter amplifier: 100W (THD+N with limiter deactivated: 10%). -Woofer: 5.25-inch, with protective metal grille. -Tweeter: 1-inch, with protective metal grille. -Includes US mains cable, 4 self-adhesive feet. Dimension: 7" x 9" x 11" Originally: $999.00

Neumann KH 120 DSP Powered Studio Monitor/Speaker never used in the box. Mathematically Modeled Dispersion waveguide: The magnetically shielded aluminum cabinet is loaded with a long-throw, composite-sandwich 5.25-inch woofer and a titanium-fabric 1-inch dome tweeter. A 145-watt amplifier drives the woofer, while the tweeter obtains its power from a 100-watt amp. The front baffle incorporates Neumann’s Mathematically Modeled Dispersion (MMD) waveguide, which helps produce a broad sweet spot and smooth off-axis response. In a stereo configuration, the KH 120 delivers rock-solid imaging with a satisfying sense of depth. The KH 120 exhibits a smooth, natural frequency response, delivering bass amazingly well for its diminutive size. Its midrange presentation is detailed and revealing, neither overly forward nor recessive. The KH 120 is fitted with a full complement of control settings for integration into a variety of acoustical environments. You can confidently make critical EQ and mix placement decisions with this speaker. -Powered: Yes. -Power Configuration: Bi-amped. -Quantity: Single. -LF Driver Size: 5.25" Woofer. -LF Driver Type: Magnetically shielded. -HF Driver Size: 1" Tweeter. -LF Driver Power Amp: 145W. -HF Driver Power Amp: 100W. -Total Power: 245W. -Frequency Response: 44Hz-21kHz (±3 dB). -Crossover Frequency: 1.7kHz. -Maximum Peak SPL: 116.8 dB SPL. -Input Types: 1 x XLR, 1 x Coax (S/PDIF). -Output Types: 1 x Coax (S/PDIF). -Other I/O: 1 x RJ45 (Ethernet Control Network). -Features: DIP switches, Tilt, Input Gain, Input Selector. -Software: Neumann MA 1 Monitor Alignment App. -Enclosure Type: Front Ported. Monitor Features: -Small-format nearfield monitor with high SPL capability and deep bass extension to 44Hz. -DSP engine for improved performance and automatic room alignment. -Analog and S/PDIF connectivity (optional AES67). -High-precision drivers, Mathematically Modeled Dispersion (MMD) waveguide. -Razor-sharp imaging due to extremely low tolerances (±0.5dB) May be combined with other KH series speakers in immersive or surround setups. -Linear frequency response: 44Hz–21kHz (±3dB). -Linear phase response: 120Hz–16kHz (±45°) with latency <2.6 ms. -Free-field frequency response: 44Hz–21kHz (±3dB). -Self-generated noise @ 10cm: <20dB(A) SPL (with input gain set to 100dB SPL for 0dBu). -Max. SPL (half space, 3% THD at 1m): 116.8dB SPL (averaged between 100Hz and 6kHz). -Acoustical Principle: bass reflex, front-baffle ports. -Analog input(s): XLR (analog, electronically balanced). -Analog input impedance: 24k ohms. -Digital input(s): S/PDIF; RCA (75 Ω). -Input gain control (sensitivity): 0dB–15dB. -Output level control: 94, 100, 108, and 114dB SPL (with 0dBu input level). -EQ, Bass: 0, -2, -4, -6dB. -EQ, Low-Mid: 0, -2, -4, -6dB. -EQ, Treble: +1, 0, -1, -2dB. -Control: Local; Network. -Crossover frequency: 1.7kHz. -FIR phase correction: Linear phase (120Hz–16kHz; +/- 45°). -Output power, woofer amplifier: 145W (THD+N with limiter deactivated: 10%). -Output power, tweeter amplifier: 100W (THD+N with limiter deactivated: 10%). -Woofer: 5.25-inch, with protective metal grille. -Tweeter: 1-inch, with protective metal grille. -Includes US mains cable, 4 self-adhesive feet. Dimension: 7" x 9" x 11" Originally: $999.00

Neumann KH 120 DSP Powered Studio Monitor/Speaker never used in the box. Mathematically Modeled Dispersion waveguide: The magnetically shielded aluminum cabinet is loaded with a long-throw, composite-sandwich 5.25-inch woofer and a titanium-fabric 1-inch dome tweeter. A 145-watt amplifier drives the woofer, while the tweeter obtains its power from a 100-watt amp. The front baffle incorporates Neumann’s Mathematically Modeled Dispersion (MMD) waveguide, which helps produce a broad sweet spot and smooth off-axis response. In a stereo configuration, the KH 120 delivers rock-solid imaging with a satisfying sense of depth. The KH 120 exhibits a smooth, natural frequency response, delivering bass amazingly well for its diminutive size. Its midrange presentation is detailed and revealing, neither overly forward nor recessive. The KH 120 is fitted with a full complement of control settings for integration into a variety of acoustical environments. You can confidently make critical EQ and mix placement decisions with this speaker. -Powered: Yes. -Power Configuration: Bi-amped. -Quantity: Single. -LF Driver Size: 5.25" Woofer. -LF Driver Type: Magnetically shielded. -HF Driver Size: 1" Tweeter. -LF Driver Power Amp: 145W. -HF Driver Power Amp: 100W. -Total Power: 245W. -Frequency Response: 44Hz-21kHz (±3 dB). -Crossover Frequency: 1.7kHz. -Maximum Peak SPL: 116.8 dB SPL. -Input Types: 1 x XLR, 1 x Coax (S/PDIF). -Output Types: 1 x Coax (S/PDIF). -Other I/O: 1 x RJ45 (Ethernet Control Network). -Features: DIP switches, Tilt, Input Gain, Input Selector. -Software: Neumann MA 1 Monitor Alignment App. -Enclosure Type: Front Ported. Monitor Features: -Small-format nearfield monitor with high SPL capability and deep bass extension to 44Hz. -DSP engine for improved performance and automatic room alignment. -Analog and S/PDIF connectivity (optional AES67). -High-precision drivers, Mathematically Modeled Dispersion (MMD) waveguide. -Razor-sharp imaging due to extremely low tolerances (±0.5dB) May be combined with other KH series speakers in immersive or surround setups. -Linear frequency response: 44Hz–21kHz (±3dB). -Linear phase response: 120Hz–16kHz (±45°) with latency <2.6 ms. -Free-field frequency response: 44Hz–21kHz (±3dB). -Self-generated noise @ 10cm: <20dB(A) SPL (with input gain set to 100dB SPL for 0dBu). -Max. SPL (half space, 3% THD at 1m): 116.8dB SPL (averaged between 100Hz and 6kHz). -Acoustical Principle: bass reflex, front-baffle ports. -Analog input(s): XLR (analog, electronically balanced). -Analog input impedance: 24k ohms. -Digital input(s): S/PDIF; RCA (75 Ω). -Input gain control (sensitivity): 0dB–15dB. -Output level control: 94, 100, 108, and 114dB SPL (with 0dBu input level). -EQ, Bass: 0, -2, -4, -6dB. -EQ, Low-Mid: 0, -2, -4, -6dB. -EQ, Treble: +1, 0, -1, -2dB. -Control: Local; Network. -Crossover frequency: 1.7kHz. -FIR phase correction: Linear phase (120Hz–16kHz; +/- 45°). -Output power, woofer amplifier: 145W (THD+N with limiter deactivated: 10%). -Output power, tweeter amplifier: 100W (THD+N with limiter deactivated: 10%). -Woofer: 5.25-inch, with protective metal grille. -Tweeter: 1-inch, with protective metal grille. -Includes US mains cable, 4 self-adhesive feet. Dimension: 7" x 9" x 11" Originally: $999.00

Neumann KH 120 DSP Powered Studio Monitor/Speaker never used in the box. Mathematically Modeled Dispersion waveguide: The magnetically shielded aluminum cabinet is loaded with a long-throw, composite-sandwich 5.25-inch woofer and a titanium-fabric 1-inch dome tweeter. A 145-watt amplifier drives the woofer, while the tweeter obtains its power from a 100-watt amp. The front baffle incorporates Neumann’s Mathematically Modeled Dispersion (MMD) waveguide, which helps produce a broad sweet spot and smooth off-axis response. In a stereo configuration, the KH 120 delivers rock-solid imaging with a satisfying sense of depth. The KH 120 exhibits a smooth, natural frequency response, delivering bass amazingly well for its diminutive size. Its midrange presentation is detailed and revealing, neither overly forward nor recessive. The KH 120 is fitted with a full complement of control settings for integration into a variety of acoustical environments. You can confidently make critical EQ and mix placement decisions with this speaker. -Powered: Yes. -Power Configuration: Bi-amped. -Quantity: Single. -LF Driver Size: 5.25" Woofer. -LF Driver Type: Magnetically shielded. -HF Driver Size: 1" Tweeter. -LF Driver Power Amp: 145W. -HF Driver Power Amp: 100W. -Total Power: 245W. -Frequency Response: 44Hz-21kHz (±3 dB). -Crossover Frequency: 1.7kHz. -Maximum Peak SPL: 116.8 dB SPL. -Input Types: 1 x XLR, 1 x Coax (S/PDIF). -Output Types: 1 x Coax (S/PDIF). -Other I/O: 1 x RJ45 (Ethernet Control Network). -Features: DIP switches, Tilt, Input Gain, Input Selector. -Software: Neumann MA 1 Monitor Alignment App. -Enclosure Type: Front Ported. Monitor Features: -Small-format nearfield monitor with high SPL capability and deep bass extension to 44Hz. -DSP engine for improved performance and automatic room alignment. -Analog and S/PDIF connectivity (optional AES67). -High-precision drivers, Mathematically Modeled Dispersion (MMD) waveguide. -Razor-sharp imaging due to extremely low tolerances (±0.5dB) May be combined with other KH series speakers in immersive or surround setups. -Linear frequency response: 44Hz–21kHz (±3dB). -Linear phase response: 120Hz–16kHz (±45°) with latency <2.6 ms. -Free-field frequency response: 44Hz–21kHz (±3dB). -Self-generated noise @ 10cm: <20dB(A) SPL (with input gain set to 100dB SPL for 0dBu). -Max. SPL (half space, 3% THD at 1m): 116.8dB SPL (averaged between 100Hz and 6kHz). -Acoustical Principle: bass reflex, front-baffle ports. -Analog input(s): XLR (analog, electronically balanced). -Analog input impedance: 24k ohms. -Digital input(s): S/PDIF; RCA (75 Ω). -Input gain control (sensitivity): 0dB–15dB. -Output level control: 94, 100, 108, and 114dB SPL (with 0dBu input level). -EQ, Bass: 0, -2, -4, -6dB. -EQ, Low-Mid: 0, -2, -4, -6dB. -EQ, Treble: +1, 0, -1, -2dB. -Control: Local; Network. -Crossover frequency: 1.7kHz. -FIR phase correction: Linear phase (120Hz–16kHz; +/- 45°). -Output power, woofer amplifier: 145W (THD+N with limiter deactivated: 10%). -Output power, tweeter amplifier: 100W (THD+N with limiter deactivated: 10%). -Woofer: 5.25-inch, with protective metal grille. -Tweeter: 1-inch, with protective metal grille. -Includes US mains cable, 4 self-adhesive feet. Dimension: 7" x 9" x 11" Originally: $999.00

Neumann KH 120 DSP Powered Studio Monitor/Speaker never used in the box. Mathematically Modeled Dispersion waveguide: The magnetically shielded aluminum cabinet is loaded with a long-throw, composite-sandwich 5.25-inch woofer and a titanium-fabric 1-inch dome tweeter. A 145-watt amplifier drives the woofer, while the tweeter obtains its power from a 100-watt amp. The front baffle incorporates Neumann’s Mathematically Modeled Dispersion (MMD) waveguide, which helps produce a broad sweet spot and smooth off-axis response. In a stereo configuration, the KH 120 delivers rock-solid imaging with a satisfying sense of depth. The KH 120 exhibits a smooth, natural frequency response, delivering bass amazingly well for its diminutive size. Its midrange presentation is detailed and revealing, neither overly forward nor recessive. The KH 120 is fitted with a full complement of control settings for integration into a variety of acoustical environments. You can confidently make critical EQ and mix placement decisions with this speaker. -Powered: Yes. -Power Configuration: Bi-amped. -Quantity: Single. -LF Driver Size: 5.25" Woofer. -LF Driver Type: Magnetically shielded. -HF Driver Size: 1" Tweeter. -LF Driver Power Amp: 145W. -HF Driver Power Amp: 100W. -Total Power: 245W. -Frequency Response: 44Hz-21kHz (±3 dB). -Crossover Frequency: 1.7kHz. -Maximum Peak SPL: 116.8 dB SPL. -Input Types: 1 x XLR, 1 x Coax (S/PDIF). -Output Types: 1 x Coax (S/PDIF). -Other I/O: 1 x RJ45 (Ethernet Control Network). -Features: DIP switches, Tilt, Input Gain, Input Selector. -Software: Neumann MA 1 Monitor Alignment App. -Enclosure Type: Front Ported. Monitor Features: -Small-format nearfield monitor with high SPL capability and deep bass extension to 44Hz. -DSP engine for improved performance and automatic room alignment. -Analog and S/PDIF connectivity (optional AES67). -High-precision drivers, Mathematically Modeled Dispersion (MMD) waveguide. -Razor-sharp imaging due to extremely low tolerances (±0.5dB) May be combined with other KH series speakers in immersive or surround setups. -Linear frequency response: 44Hz–21kHz (±3dB). -Linear phase response: 120Hz–16kHz (±45°) with latency <2.6 ms. -Free-field frequency response: 44Hz–21kHz (±3dB). -Self-generated noise @ 10cm: <20dB(A) SPL (with input gain set to 100dB SPL for 0dBu). -Max. SPL (half space, 3% THD at 1m): 116.8dB SPL (averaged between 100Hz and 6kHz). -Acoustical Principle: bass reflex, front-baffle ports. -Analog input(s): XLR (analog, electronically balanced). -Analog input impedance: 24k ohms. -Digital input(s): S/PDIF; RCA (75 Ω). -Input gain control (sensitivity): 0dB–15dB. -Output level control: 94, 100, 108, and 114dB SPL (with 0dBu input level). -EQ, Bass: 0, -2, -4, -6dB. -EQ, Low-Mid: 0, -2, -4, -6dB. -EQ, Treble: +1, 0, -1, -2dB. -Control: Local; Network. -Crossover frequency: 1.7kHz. -FIR phase correction: Linear phase (120Hz–16kHz; +/- 45°). -Output power, woofer amplifier: 145W (THD+N with limiter deactivated: 10%). -Output power, tweeter amplifier: 100W (THD+N with limiter deactivated: 10%). -Woofer: 5.25-inch, with protective metal grille. -Tweeter: 1-inch, with protective metal grille. -Includes US mains cable, 4 self-adhesive feet. Dimension: 7" x 9" x 11" Originally: $999.00